17-5
IM 765501-01E
Troubleshooting
and
Maintenance
3
2
1
6
5
4
9
8
7
12
11
10
15
14
13
18
17
17
16
Index
App
Instrumental Errors (+100 and up)
Error No. Error Message
Corrective Action
Page
+100
Expression syntax error
Check that the syntax of the MATH definition file is correct.
App-1
+101
Too complex expression
Keep the total number of constants, variables, and operators in a App-1
MATH definition less than or equal to 256.
Keep the total number of constants, variables, and operators in all
MATH definitions less than or equal to 1024.
+201
Interlocking
Release the interlock, and then turn the output ON.
-
+202
Hardware abnormal
Wait for the temperature inside the case to become normal, and -
turn the output ON.
+203
Sweep running
Stop the sweep operation before changing the settings.
-
+300
Hardware input abnormal error
Check the input.
-
+301
Low battery
Request to have the battery replaced, because the time stamp
17-11
when creating files will not be correct.
Messages (Messages That Are Not Entered in the Error Queue but Displayed in the
Error Log)
Error Message
Corrective Action
Page
Log sweep zero cross
Set the start and stop values with values with the same sign.
6-2
Log sweep start level illegal
Set the start value to a value other than 0.
6-2
Log sweep stop level illegal
Set the stop value to a value other than 0.
6-2
Outside of number of trigger count Increase the step value so that the number of points is less than 6-3
or equal to 65535.
Cannot execute measure auto
Correct the setting conflict (see -221 Setting conflict).
-
ranging
Cannot average with block mode
Correct the setting conflict (see -221 Setting conflict).
-
Illegal compare level
Set the comparison operation settings so that the upper limit is
8-7
greater than the lower limit.
Program sweep cannot be
Select a sweep pattern file.
6-5
executed
Calculation cannot be executed
Select a MATH definition file.
8-4
Illegal CAL data
It is possible that the specifications may not be met even when
-
the GS610 is calibrated with the default calibration values.
Request to have the GS610 recalibrated.
17.2 Error Code Description and Corrective Action
