17-4
IM 765501-01E
Errors in Execution (-200 to -299)
Error No. Error Message
Corrective Action
Page
–221
Setting conflict
The following four setting conflicts are possible.
-
• Pulse source and block average
• Pulse source and auto measurement range
• The source and measurement are set to the same function
and using auto measurement range
• Limiter tracking OFF and auto measurement range
Change the settings so that these conflicts do not occur.
–222
Data out of range
Check the selectable range of the parameter.
-
If the command can use MINimum and MAXimum as its
parameter, the range can also be queried.
–256
Filename not found
Check that the file exists.
16-16, 16-27,
You can also use the CATalog? command to query the list of
16-34
files.
–285
Program syntax error
Check that the sweep pattern file is in the correct format.
6-11
Device Errors (-300 to -399)
Error No. Error Message
Corrective Action
Page
–350
Queue overflow
Read the error using :SYSTem:ERRor? or clear the error
16-35, 16-40
queue using *CLS.
–361
Parity error
Check that the communication settings on the GS610 and
14-6
PC match.
If the settings are correct, check the cable, and lower the baud rate.
–362
Framing error
Check that the communication settings on the GS610 and
14-6
PC match.
If the settings are correct, check the cable, and lower the baud rate.
–363
Input buffer overrun
Set the handshaking to a setting other than OFF.
14-6
Lower the baud rate.
Query Errors (-400 to -499)
Error No. Error Message
Corrective Action
Page
–410
Query INTERRUPTED
Check transmission/reception procedure.
16-3
–420
Query UNTERMINATED
Check transmission/reception procedure.
16-3
–430
Query DEADLOCK
Keep the program message shorter than or equal to 64 KB.
16-3
17.2 Error Code Description and Corrective Action
