Yealink MeetingSpace VC800 User Manual Download Page 34

Page: 34 / 223

User Guide for the VC800 Video Conferencing System

LED Instructions

Indicator LED on the VC800 codec:

LED Status

Description

Solid green

The VC800 codec is powered on.
The VC800 codec is upgrading firmware.

Solid red

The VC800 codec is in sleep mode.

Solid orange

System exception (e.g., network unavailable, update failure).

Off

The VC800 codec is powered off, or is not connected to the
power adapter.

Indicator LED on the CP960:

LED Status

Description

Solid red

The CP960 conference phone is initializing.
The CP960 conference phone is muted when the VC800 is during a
call.

Flashing red

The CP960 conference phone is ringing.

Solid green

The CP960 conference phone is placing a call.
There is an active call on the CP960 conference phone.

Off

The CP960 conference phone is idle.
The CP960 conference phone is not connected to the VC800
correctly.

Mute Indicator LED on the CPE90 Wired Expansion Mic:

LED Status

Description

Solid red

The CPE90 is muted when the VC800 is during a call.

Flashing red

The VC800 is ringing.

Solid green

The VC800 is placing a call.
The CPE90 is unmuted when the VC800 is during a call.

Off

The CPE90 is not connected to the CP960 conference
phone.
The CPE90 is idle.

Summary of Contents for MeetingSpace VC800
































































































































































































































Search results

Summary of Contents for MeetingSpace VC800

Reviews:

Related manuals for MeetingSpace VC800

Brands by name

Popular brands

Yealink MeetingSpace VC800, User Manual

Search results

Summary of Contents for MeetingSpace VC800

Reviews:

Related manuals for MeetingSpace VC800

Brands by name

Popular brands