Yealink MeetingSpace VC800 User Manual Download Page 113

Page: 113 / 223

Using the VC800 Video Conferencing System

Click

Upload

to complete importing the multi-way MCU.

To view multi-way MCU status via the remote control:

Select (

More

menu).

Press or to scroll to

Status

and then

press

enter submenu.

Press or to scroll to

License

and then press

If the Multi-Way MCU displays

Unsupported

, it means you have not imported a

multi-way MCU. So the system supports up to two-way video call with a presentation
and a voice call (an original caller and two other sites).

If the Multi-Way MCU displays

X~Y Available

, it means you have imported a trail

version of multi-way MCU. So the system supports up to 25-way video call with a
presentation (an original caller and 24 other sites) during this period.

If the Multi-Way MCU displays

Eternal

, it means you have imported a permanent

version of the multi-way MCU. So the system supports 25-way video call with a
presentation (an original caller and 24 other sites) permanently.

Summary of Contents for MeetingSpace VC800
































































































































































































































Search results

Summary of Contents for MeetingSpace VC800

Reviews:

Related manuals for MeetingSpace VC800

Brands by name

Popular brands

Yealink MeetingSpace VC800, User Manual

Search results

Summary of Contents for MeetingSpace VC800

Reviews:

Related manuals for MeetingSpace VC800

Brands by name

Popular brands