7 System Setup
7.2 Tool Data Setting
7-9
168283-1CD
168283-1CD
Hardware Installation &
Software Upgrade
2. The system must be in Teach mode with all errors cleared before
adjustments can be made to Tool Data. The message “Switch to
TEACH mode to set” appears if the system is left in Play mode.
Fig. 7-1: Setup Tool Properties
3. While in Teach Mode, press the tool number to select the Tool Number
and modify. Press the Return key after the tool number is entered.
4. Click the box to the right of the tool number to enter a text description.
5. Enter the tool data following the examples shown below in Tool A and
Tool B:
59 of 121
