ENGINE
5-84
6LPA Service Manual
Timing Gear
© 2007 Yanmar Marine International
7. Install all the timing gears and measure the
backlash using a dial indicator (Figure 5-202).
• Standard gear backlash: 0.05 to 0.15 mm
(0.002 to 0.006 in.)
• Maximum gear backlash: 0.30 mm (0.012 in.)
If the measured gear backlash exceeds the
maximum specification, replace all the gears as
a set.
Figure 5-202
Figure 5-202
1 – Crankshaft Timing Gear to Idler Gear
2 – Fuel Injection Pump Drive Gear to Idler Gear
3 – Oil Pump Drive Shaft Gear to Oil Pump Gear
4 – Move in Both Directions
8. Remove the timing gears.
0005202
(2)
(1)
(
3
)
(4)
(4)
(4)
