GENERAL SERVICE INFORMATION
6LPA Service Manual
3-47
Special Service Materials (Locally Available)
12/05
© 2007 Yanmar Marine International
Special Service Materials Reference
(Locally Available)
NOTICE: It is recommended that liquid gasket
Three Bond® TB1212 should be used for service
work. Before providing service, observe the
cautions below:
1. Build up each sealant bead equally.
2. For bolt holes, apply liquid gasket to the inside
surface of each hole.
3. Three Bond
®
TB1104 (Gray) or Three Bond
®
TB1102 (Yellow) is used with a gasket. The use
of either of these sealant bonds without a
gasket alone is not effecive.
4. If a gasket is used, do not use sealant TB1212.
Material
Contents (Typical)
Features and Application
Liquid gasket
Three Bond
®
No. 1 TB1101
200 g (1 kg also
available)
Non-drying liquid gasket; solventless type, easy to
remove, superior seawater resistance, applicable to
various mating surfaces
Three Bond
®
No. 2 TB1102
200 g (1 kg also
available)
Non-drying liquid gasket; easy to apply, superior water
and oil resistance, especially superior gasoline/fuel
resistance
Three Bond
®
No. 3 TB1103
150 g
Drying film; low viscosity and forming of thin film,
appropriate for mating surfaces of precision parts
Three Bond
®
No. 4 TB1104
200 g (1 kg also
available)
Semi-drying viscoelastic material, applicable for non-flat
surfaces have indentions or protrusions, superior heat,
water and oil resistance
Three Bond
®
No. 10 TB1211
100 g
Solventless type silicone based sealant, applicable for
high temperature areas -50 to 250°C (122 to 482°F)
Three Bond
®
TB1212
100 g
Silicone based, non-fluid type, thick application possible
Adhesive
Loctite
®
TB1401
200 g
Prevention of loose fasteners, gasket leaks, and
corrosion. Torque required to loosen fastener: 10 to
20% greater than tightened torque
Loctite
®
Super TB1330B
50 g
Excellent adhesion strength, locks fastener
semi-permanently
Pipe seal tape
5 m round tape
Sealing material for pipe threads. Ambient temperature
range: -150 to -200°C (302 to 392°F)
O-ring kit
1.92-m diameter-1
O-ring of any size can be prepared as required.
Including adhesives, release agents, cutters and jigs.
2.42-m diameter-1
3.12-m diameter-1
3.52-m diameter-1
5.72-m diameter-1
EP lubricant
(molybdenum
disulfate)
Lowcol Paste (Brand name)
50 g
For assembly of engine cylinders, pistons, metals,
shafts, etc. Spray type application.
Paste Spray (Brand name)
330 g
Molypaste (Brand name)
50 g
Prevention of seized threads at high temperatures.
Applicable to exhaust and intake valves, stems, guides
and face.