ENGINE
6LPA Service Manual
5-21
Cylinder Head
12/05
© 2007 Yanmar Marine International
6. Clean all valve guide internal surfaces using a
brush and solvent (Figure 5-21).
Figure 5-21
Figure 5-21
7. Thoroughly clean the cylinder head deck
surface using a soft brush and solvent
(Figure 5-22).
Figure 5-22
Figure 5-22
8. Measure the flatness of the cylinder head deck
surface using a straight edge and feeler gauge
(Figure 5-23).
• Maximum warpage: 0.20 mm
If the measured warpage exceeds the specified
maximum, replace the cylinder head.
Figure 5-23
Figure 5-23
9. Check the intake and exhaust ports and the
cylinder head deck surfaces for cracks, using a
color check agent (Figure 5-24). If any cracks
are discovered, replace the cylinder head.
Figure 5-24
Figure 5-24
0004946
0004947
000494
8
0004949