ENGINE
6LPA Service Manual
5-39
Cylinder Head
12/05
© 2007 Yanmar Marine International
Final Assembly
1. Install the pulley and timing belt. See Timing
Belt Installation on page 5-73.
2. Check and adjust the valve clearance. See
Valve Clearance Inspection and Adjustment on
page 5-90.
Install the Rocker Cover
1. Completely remove all packing material. from
the semi-circular plug sealing area.
2. Apply seal packing (Figure 5-76, (2)) to the
semi-circular plug (Figure 5-76, (1)). (Seal
packing: TOYOTA P/N 08826-00080 or
equivalent)
3. Install the semi-circular plug to the cylinder
head.
Figure 5-76
Figure 5-76
4. Completely remove all packing material from
the rocker cover sealing area.
5. Apply seal packing to the cylinder head as
shown in Figure 5-77. (Seal packing: TOYOTA
P/N 08826-00080 or equivalent)
Figure 5-77
Figure 5-77
6. Install the gasket to the rocker cover.
7. Install the rocker cover using 12 new seal
washers and 12 bolts. Uniformly tighten the
bolts in steps and torque to 65 kgf·cm, 6.37 N·m
(56.38 lb-in.).
(1)
(2)
0005106
0005107