ALTERNATOR
11-12
6LPA Service Manual
Alternator Service
© 2007 Yanmar Marine International
8. Install the special pulley nut tool
(Figure 11-14, (1)) in a vise. Using special
pulley nut tool (Figure 11-14, (2)) turn the tool
in the direction shown by arrow to loosen the
pulley nut.
Note: NEVER loosen the rotor shaft over 1/4 of
a turn to prevent damage to the rotor
shaft.
9. Remove the pulley nut and pulley.
Figure 11-14
Figure 11-14
10. Remove the 4 rectifier end frame nuts
(Figure 11-15, (1)).
Figure 11-15
Figure 11-15
11. Using a special two-jaw puller tool
(Figure 11-16, (1)), remove rectifier end frame.
Figure 11-16
Figure 11-16
12. Remove the alternator washer (Figure 11-17).
Figure 11-17
Figure 11-17
13. Remove the rotor from the drive frame.
Figure 11-18
Figure 11-18
0004
83
9
(2)
(1)
(1)
(1)
(1)
(1)
(1)
0004
8
40
0004
8
41
(1)
0004
8
42
0005567