STARTER MOTOR
6LPA Service Manual
10-15
Starter
12/05
© 2007 Yanmar Marine International
Figure 10-35
Figure 10-35
5. Apply grease to the steel ball and insert the
steel ball into the clutch shaft hole.
6. Apply grease to the return spring and insert the
return spring (Figure 10-36, (1)) into the
magnetic switch hole.
7. Install the plate washer (Figure 10-36, (2)) to
the magnetic switch.
Figure 10-36
Figure 10-36
8. Install the idler gear (Figure 10-37, (1)) and
bearing (Figure 10-37, (2)) to the starter
housing.
Figure 10-37
Figure 10-37
9. Assemble the starter housing and magnetic
switch assembly, using 3 screws
(Figure 10-38).
Figure 10-38
Figure 10-38
0005
3
95
(1)
(1)
0005424
(2)
(1)
0005425
(2)
(1)
0005426