ENGINE
6LPA Service Manual
5-85
Timing Gear
12/05
© 2007 Yanmar Marine International
Front Crankshaft Oil Seal
Replacement
There are two oil seal replacement methods.
Method 1
When the timing gear cover has been removed
from the cylinder block:
1. Tap out the oil seal using a screwdriver and
hammer (Figure 5-203).
Figure 5-203
Figure 5-203
2. Tap in a new oil seal to install using special tool
P/N 119770-01100 (Figure 5-204, (1)), until the
surface is level with that of the timing gear
cover.
3. Apply grease to the oil seal lip.
Figure 5-204
Figure 5-204
Method 2
When the timing gear cover is installed to the
cylinder block:
1. Remove the oil seal using a suitable tool
(Figure 5-205, (1)).
Figure 5-205
Figure 5-205
2. Apply grease to the lip of the new oil seal.
3. Tap in a new oil seal to install using special tool
P/N 119770-01100 (Figure 5-206, (1)), until the
surface is level with that of the timing gear
cover.
Figure 5-206
Figure 5-206
000520
3
(1)
0005204
(1)
0005205
(1)
0005206