ENGINE
5-62
6LPA Service Manual
Cylinder Block
© 2007 Yanmar Marine International
7. Using a piston ring expander, install the oil ring
with the end gap (Figure 5-137, (1)) facing the
opposite side of the coil joint
(Figure 5-137, (2)).
Figure 5-137
Figure 5-137
8. Using a piston ring expander, install the piston
rings with the identification marks facing up
(Figure 5-138).
Figure 5-138
Figure 5-138
1 – No. 1 Piston Ring ID Mark
2 – No. 2 Piston Ring ID Mark
9. Install the piston rings with the ring end gaps as
shown in Figure 5-139.
Note: NEVER allow ring end gaps to overlap at
the same position.
Figure 5-139
Figure 5-139
1 – No. 1 Piston Ring End Gap
2 – No. 2 Piston Ring End Gap
3 – Oil Piston Ring End Gap
4 – Oil Piston Coil Ring End Gap
5 – Piston Front Mark (Arrow)
10. Align the connecting rod bearing claw
(Figure 5-140, (1)) with the groove in
connecting rod and connecting rod cap. Install
all connecting rod bearings.
Figure 5-140
Figure 5-140
(2)
(1)
0005060
(1)
(2)
0005061
(5)
(2)
(4)
(1)
(
3
)
0005062
(1)
000506
3