ALTERNATOR
11-18
6LPA Service Manual
Alternator Service
© 2007 Yanmar Marine International
Assembly
1. Install the rotor assembly into the drive end
frame and install the pulley to the shaft
(Figure 11-35).
Figure 11-35
Figure 11-35
2. Install the rectifier end frame onto the rotor and
drive end frame then install the alternator
washer (Figure 11-36, (1)) above the rotor.
Figure 11-36
Figure 11-36
3. Slowly press on the rectifier end frame using a
29 mm socket wrench and a press
(Figure 11-37, (1)).
Figure 11-37
Figure 11-37
4. Install the 4 nuts (Figure 11-38, (1)) and torque
to: 46 kgf·cm, 4.51 N·m (39.9 lb-in.).
Figure 11-38
Figure 11-38
5. Manually tighten the pulley nut to secure the
pulley to the rotor shaft.
0004
8
61
(1)
0004
8
0004
8
6
3
(1)
(1)
(1)
(1)
(1)
0004
8
40
