Yamaha VK10W, Supplementary Service Manual

Page: 134 / 208

66
SPEC
TIGHTENING TORQUE
*: ESSO beacon 325 grease or Aeroshell grease #7A
NOTE:
Tightening steps:
1. Tighten the bolt to a torque at 120 Nm (12.0 m · kg, 85 ft · lb).
2. Loosen the bolt completely.
3. Retighten the bolt to a torque of 60 Nm (6.0 m · kg, 43 ft · lb).
Shaft and sliding frame 72 7.2 52 Apply LOCTITE
®
Shock absorber and front pivot arm 49 4.9 35
Shock absorber and front suspension bracket 49 4.9 35
Front pivot arm and sliding frame 72 7.2 52 Apply LOCTITE
®
Suspension wheel (front, center and rear) 72 7.2 52
Apply LOCTITE
®
Wheel bracket and sliding frame 24 2.4 17
Shock absorber and rear suspension bracket 49 4.9 35
Rear pivot arm and pull rod 49 4.9 35 Apply LOCTITE
®
Rear suspension bracket and pull rod 49 4.9 35 Apply LOCTITE
®
Shock absorber and rear pivot arm 49 4.9 35
Rear pivot arm and rear pivot arm bracket 24 2.4 17
Control rod and sliding frame 72 7.2 52 Apply LOCTITE
®
Control rod bolt 32 3.2 23
Rear pivot arm bracket 72 7.2 52 Apply LOCTITE
®
Wheel bracket shaft and sliding frame 80 8.0 58
Pivot bracket and sliding bracket 69 6.9 50
Pivot bracket and rear sliding frame 34 3.4 24
Pivot bracket and spring hook 28 2.8 20 Apply grease*
Rear axle 80 8.0 58
Set bolt (front axle) 9 0.9 6.5 Apply LOCTITE
®
Speed sensor 20 2.0 14
Bearing holder 20 2.0 14
Gear unit (speed sensor) 40 4.0 29
Parts to be tightened
Tightening torque
Remarks
Nm m · kg ft · lb