Yamaha MBK MW125 2014, Service Manual

Page: 182 / 380

FRONT FORKS
4-73
TIP
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
8. Install:
• Oil seal clip “1”
TIP
Adjust the oil seal clip so that it fits into the outer
tube’s groove.
9. Install:
• Dust seal “1”
(with the fork seal driver attachment “2” and
fork seal driver weight “3”)
10.Fill:
• Front fork leg
(with the specified amount of the recom-
mended fork oil)
NOTICE
ECA14230
• Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
• When disassembling and assembling the
front fork leg, do not allow any foreign ma-
terial to enter the front fork.
Fork seal driver weight
90890-01367
Replacement hammer
YM-A9409-7
Fork seal driver attachment (ø33)
90890-01368
Replacement 33 mm
YM-A9409-4
3
2
1 New
New
New
1
Fork seal driver weight
90890-01367
Replacement hammer
YM-A9409-7
Fork seal driver attachment (ø38)
90890-01372
Replacement 38 mm
YM-A5142-1
Recommended oil
Fork oil 10W or equivalent
Main tube oil quantity (left)
145.0 cm³ (4.90 US oz, 5.11
Imp.oz)
Main tube oil quantity (right)
145.0 cm³ (4.90 US oz, 5.11
Imp.oz)
Guide tube oil quantity (left)
165.0 cm³ (5.58 US oz, 5.82
Imp.oz)
Guide tube oil quantity (right)
165.0 cm³ (5.58 US oz, 5.82
Imp.oz)
New
3
2
1
New