Yamaha MBK MW125 2014, Service Manual

Page: 15 / 380

FEATURES
1-6
Oil change indicator “OIL CHANGE”
This indicator will come on at the initial 1000 km
(600 mi), then at 4000 km (2500 mi) and every
4000 km (2500 mi) thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset the oil
change indicator and the oil change tripmeter.
To reset them both, select the oil change tripme-
ter, and then push the “RESET” button for one
second. While “OIL CHANGE” is flashing, push
the “RESET” button for three seconds. The oil
change tripmeter will be reset and the oil change
indicator will go off.
If the engine oil is changed before the oil change
indicator comes on (i.e., before the periodic oil
change interval has been reached), the oil
change tripmeter must be reset for the next peri-
odic oil change to be indicated at the correct
time.
TIP
If the oil change tripmeter is reset before the ini-
tial 1000 km (600 mi), the next periodic oil
change interval will be at every 4000 km (2500
mi) thereafter.
V-belt replacement indicator “V-BELT”
This indicator come on at every 20000 km
(12500 mi) to indicate that the V-belt should be
replaced.
If the V-belt replacement indicator has come on,
after replacing the V-belt, reset the V-belt re-
placement indicator and the V-belt replacement
tripmeter. To reset them both, select the V-belt
replacement tripmeter, and then push the “RE-
SET” button for one second. While “V-BELT” is
flashing, push the “RESET” button for three to
four seconds. The V-belt replacement tripmeter
will be reset and the V-belt replacement indica-
tor will go off.
If the V-belt is replaced before the V-belt re-
placement indicator comes on (i.e., before the
periodic V-belt replacement interval has been
reached), the V-belt replacement tripmeter must
be reset for the next periodic V-belt replacement
to be indicated at the correct time.
1. Oil change indicator “OIL CHANGE”
2. Oil change tripmeter
1. V-belt replacement indicator “V-BELT”
2. V-belt replacement tripmeter
1 2
1 2