Yamaha MBK MW125 2014, Service Manual

Page: 142 / 380

REAR WHEEL
4-33
EAS30156
REMOVING THE REAR WHEEL (DISC)
1. Stand the vehicle on a level surface.
WARNING
EWA13120
Securely support the vehicle so that there is
no danger of it falling over.
TIP
Place the vehicle on the centerstand so that the
rear wheel is elevated.
EAS30159
CHECKING THE REAR WHEEL
1. Check:
• Tire
• Rear wheel
Damage/wear
→
Replace.
Refer to “CHECKING THE TIRES” on page
3-14 and “CHECKING THE WHEELS” on
page 3-13.
2. Measure:
• Radial wheel runout
• Lateral wheel runout
Refer to “CHECKING THE FRONT
WHEELS” on page 4-28.
EAS30165
INSTALLING THE REAR WHEEL (REAR
BRAKE DISC)
1. Install:
• Rear brake disc “1”
TIP
• Install the brake disc with the stamped mark “a”
facing toward the wheel.
• Tighten the bolts in stages.
2. Check:
• Rear brake disc
Refer to “CHECKING THE REAR BRAKE
DISC” on page 4-53.
Radial wheel runout limit
1.0 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
T
R
.
.
Rear brake disc bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
LOCTITE®
1
a