ENGINE SPECIFICATIONS
2-5
Big end radial clearance
0.004–0.014 mm (0.0002–0.0006 in)
Clutch
Clutch type
Dry, centrifugal automatic
Automatic centrifugal clutch
Clutch shoe thickness
3.3 mm (0.13 in)
Limit
1.5 mm (0.06 in)
Clutch shoe spring free length
29.9 mm (1.18 in)
Clutch housing inside diameter
120.0 mm (4.72 in)
Limit
120.5 mm (4.74 in)
Compression spring free length
148.4 mm (5.84 in)
Limit
142.7 mm (5.62 in)
Weight outside diameter
20.0 mm (0.79 in)
Limit
19.5 mm (0.77 in)
Clutch-in revolution
2450–2850 r/min
Clutch-stall revolution
4900–5500 r/min
V-belt
V-belt width
22.0 mm (0.87 in)
Limit
21.0 mm (0.83 in)
Transmission
Transmission type
V-belt automatic
Primary reduction ratio
1.000
Secondary reduction ratio
9.533 (44/15 x 39/12)
Gear ratio
2.361–0.794 :1
Main axle runout limit
0.08 mm (0.0032 in)
Drive axle runout limit
0.08 mm (0.0032 in)
Air filter
Air filter element
Oil-coated paper element
Fuel injector
Model/quantity
1100-01390-B/1
Throttle body
Type/quantity
AC28/1
ID mark
2CM1 00
Fuel injection sensor
Crankshaft position sensor resistance
228–342
Ω
(W/L-W/R)
Intake air pressure sensor output voltage
3.94–4.06 [email protected] kPa (3.94–4.06 [email protected]
kgf/cm², 3.94–4.06 [email protected] psi)
Intake air temperature sensor resistance
5–6
Ω
@0 °C (5–6
Ω
@32 °F)
Coolant temperature sensor resistance
5166–6314
Ω
@0 °C (5166–6314
Ω
@32 °F)
Coolant temperature sensor resistance
288-352
Ω
@80 °C (288-352
Ω
@176 °F)
Idling condition
Fuel line pressure at idling
300–390 kPa (3.0–3.9 kgf/cm², 43.5–56.6 psi)
Engine idling speed
1500–1700 r/min
Throttle grip free play
3.0–7.0 mm (0.12–0.28 in)
Summary of Contents for MBK MW125 2014
