background image

188

User Level settings

LS9-16/32  Owner’s Manual

Privileges for each user are as follows.

With the factory settings, the Administrator password is 
not set, meaning that anyone can log in with Administrator 
privileges and perform all operations. If you want to 
restrict the operations of other users, you must specify an 
Administrator password.

1

In the DISPLAY ACCESS section, press the 
[SETUP] key repeatedly to access the USER 
SETUP screen.

2

Move the cursor to the PASSWORD 
CHANGE popup button, and press the 
[ENTER] key.

A keyboard window will appear, allowing you to enter 
a password.

3

Enter the password in the NEW PASSWORD 
field; then move the cursor to the OK button 
and press the [ENTER] key.

The password can be up to eight characters. For details 
on entering a password, refer to “Assigning a name” 
(

 p. 34)

Here’s how to create a user authentication key and save it 
on USB memory. A user authentication key can be created 
only by an Administrator or Power User. The user level 
can be specified when the authentication key is created, 
but the custom fader layer, user-defined key settings, and 
preference settings will be carried over from the user who 
is currently logged-in.

1

Connect USB memory to the USB connec-
tor.

2

In the DISPLAY ACCESS section, press the 
[SETUP] key repeatedly to access the USER 
SETUP screen.

Logged-in user

Custom fader layer / user-

defined keys / preference 

setting editing

User Level setting

Password 

setting

Comment 

editing

User authentication key 

(USB memory)

Create new Overwrite-save

Administrator

Available 

(Can edit the settings for 

Administrator and for 

Guest.)

Available 

(Cannot edit the user level, since 

the administrator can always 

perform all operations. Can edit 

the user level for Guest.)

Available

Available

User

Power user

Available

Available

Available

Available

Available

Available

Normal user (a 

user without 

Power User 

privileges)

Available

N/A 

(View only)

Available

Available

Available 

(Only settings 

other than User 

Level)

Guest

Available

N/A 

(View only)

Available

Setting the Administrator pass-
word

PASSWORD CHANGE popup button

Creating a user authentication key

CREATE USER KEY button

Summary of Contents for LS9 Editor



































































































































































































































































































Reviews: