manualshive.com logo in svg

Yamaha LS9 Editor, Owner'S Manual

The Yamaha LS9 Editor is a powerful software tool designed for the Yamaha LS9 digital mixing console. Seamlessly integrate the console with your computer by downloading the free LS9 Editor installation manual from our website. This comprehensive manual provides step-by-step instructions to assist you in setting up and utilizing your LS9 console to its fullest potential.

Share
Download
background image

130

Using scene memories

LS9-16/32  Owner’s Manual

2

In the DISPLAY ACCESS section, press the 
[SCENE MEMORY] key repeatedly to 
access the SCENE LIST screen.

In this screen you can perform operations such as stor-
ing or recalling a scene.

1

Scene list

This list shows the scenes that are stored in scene 
memory. The row highlighted in blue indicates that 
this scene number is selected for operations. A read-
only scene is indicated by the R symbol, and a write-
protected scene is indicated by the protect (lock) sym-
bol.

B

STORE button

This stores the current mix settings into the location 
currently selected in the scene list.

C

STORE UNDO button

This button cancels (Undo) or re-executes (Redo) the 
most recently performed scene Store operation. This 
button is available from immediately after you over-
write (save) until the next time you store.

3

Make sure that the cursor is located some-
where other than the constant display area, 
and use the dial or the [DEC]/[INC] keys to 
select the store-destination scene number.

4

Move the cursor to the STORE button and 
press the [ENTER] key.

The SCENE STORE popup window will appear, 
allowing you to assign a title to the scene.

1

SCENE TITLE  field

This field lets you enter a title for the scene (a maxi-
mum of sixteen characters).

5

Assign a title to the scene as desired.

For details on entering text, refer to “Assigning a 
name” (

→

 p. 34)

6

Move the cursor to the STORE button 
located at the bottom of the SCENE STORE 
popup window, and press the [ENTER] key.

The SCENE STORE popup window will close, and a 
dialog box will ask you to confirm the Store operation.

• Simply changing the scene number does not actually execute 

the store or recall operation. To execute the store or recall 
operation, you must use the STORE/RECALL buttons in the 
SCENE MEMORY screen as explained in step 2 and follow-
ing or in “Recalling a scene” (

→

 p. 131), or use a user-defined 

key (

→

 p. 132) to which you’ve assigned the scene store/

recall function.

NOTE

[SCENE MEMORY] 
key

1

2
3

• Note that the scene number, channel number, or ST IN chan-

nel input level will change if you operate the dial or the [DEC]/
[INC] keys when the cursor is located in the constant display 
area.

NOTE

1

Summary of Contents for LS9 Editor



































































































































































































































































































Reviews:

No comments

Related manuals for LS9 Editor

OceanAudio 500 Series Owner'S Handbook preview
500 Series
Brand: OceanAudio Pages: 2
Hamilton Beach M40 Series Manual preview
M40 Series
Brand: Hamilton Beach Pages: 32
STK Professional Audio VM-11S DRV Owner'S Manual preview
VM-11S DRV
Brand: STK Professional Audio Pages: 28
Gastrodomus GPLAN5M User Manual preview
GPLAN5M
Brand: Gastrodomus Pages: 37
Bake Max BMPM20A Operation Manual preview
BMPM20A
Brand: Bake Max Pages: 10
G&D RackConsole-PRO 17HR Manual preview
RackConsole-PRO 17HR
Brand: G&D Pages: 16
Racing RACBTE800-UK Instruction Manual preview
RACBTE800-UK
Brand: Racing Pages: 23
Behringer PRO MIXER DJX750 (Dutch) Betjeningsvejledning preview
PRO MIXER DJX750
Brand: Behringer Pages: 10
Electrolux CASA EHSM2000 Instruction Book preview
CASA EHSM2000
Brand: Electrolux Pages: 14
Electrolux 601185 Brochure & Specs preview
601185
Brand: Electrolux Pages: 4
Electrolux 601186 Short Form Specification preview
601186
Brand: Electrolux Pages: 3
Electrolux Dito 601216 Brochure & Specs preview
Dito 601216
Brand: Electrolux Pages: 3
Electrolux Dito 601845 Brochure & Specs preview
Dito 601845
Brand: Electrolux Pages: 4
Electrolux Dito 600024 Brochure & Specs preview
Dito 600024
Brand: Electrolux Pages: 3
Electrolux Dito 601182 Brochure & Specs preview
Dito 601182
Brand: Electrolux Pages: 3
Electrolux Dito 601865 Brochure & Specs preview
Dito 601865
Brand: Electrolux Pages: 4
Electrolux Dito 601733 Brochure & Specs preview
Dito 601733
Brand: Electrolux Pages: 4
Electrolux Dito 601907 Specification Sheet preview
Dito 601907
Brand: Electrolux Pages: 2

Brands by name

Popular brands

Load more brands