manualshive.com logo in svg

Yamaha LS9 Editor, Owner'S Manual

The Yamaha LS9 Editor is a powerful software tool designed for the Yamaha LS9 digital mixing console. Seamlessly integrate the console with your computer by downloading the free LS9 Editor installation manual from our website. This comprehensive manual provides step-by-step instructions to assist you in setting up and utilizing your LS9 console to its fullest potential.

Share
Download
background image

57

HA (head amp) settings

5

Input channel oper

ations

LS9-16/32  Owner’s Manual

Here’s how to make HA (Head Amp) settings such as phantom power on/off, gain, and phase for 
each input channel.

1

Press the SELECTED CHANNEL section 
[HOME] key.

The SELECTED CH VIEW screen will appear in the 
display.

1

HA popup button

B

GAIN knob

2

Use the LAYER section to select the desired 
fader layer.

3

Press a [SEL] key in the channel module 
section or ST IN section to select the input 
channel that you want to operate.

4

If you only want to adjust the HA gain for 
that channel, operate the SELECTED 
CHANNEL section [HA GAIN] encoder.

You can obtain the same result by moving the cursor to 
the GAIN knob in the SELECTED CH VIEW screen 
and operating the dial or the [DEC]/[INC] keys.

5

If you want to edit detailed parameters such 
as phantom power on/off and phase, move 
the cursor to the HA popup button or GAIN 
knob in the HA field of the SELECTED CH 
VIEW screen, and press the [ENTER] key to 
access the HA/PATCH popup window.

In the HA/PATCH popup window you can adjust the 
HA gain, switch phantom power on/off, and switch the 
phase for sets of eight channels. This popup window 
shows the parameters for the eight channels that 
include the channel you selected in step 3.

1

+48V button

B

GAIN knob

C

ø

 (phase) button

6

To adjust the HA gain, move the cursor to 
the GAIN knob of the desired channel in the 
window, and use the dial or the [DEC]/[INC] 
keys.

The input level of the channel is shown by the level 
meter located immediately to the right of the GAIN 
knob in the screen.

7

To turn on phantom power, move the cursor 
to the +48V button of the desired channel in 
the window, and press the [ENTER] key.

The +48V button will turn on (red), and phantom 
power will be supplied to the corresponding INPUT 
jack.

HA (head amp) settings

1

2

1

2

3

• If you’ve turned on POPUP APPEARS WHEN PRESSING 

KNOBS in the PREFERENCE popup window (

→

 p. 194), you 

can also access the above popup window by pressing the 
SELECTED CHANNEL section [HA GAIN] encoder.

HINT

• If you don’t need phantom power, be sure to turn this but-

ton off.

• Before you turn phantom power on, make sure that no 

devices other than phantom-powered devices, such as a 
condenser microphone, are connected. Otherwise, you 
risk damaging the devices.

• Do not connect or disconnect a device while phantom 

power is applied. Doing so can damage the connected 
device and/or the unit itself.

• To protect your speaker system, leave the power amps 

(powered speakers) turned off when switching the phan-
tom power on/off. We also recommend that you set all 
output level faders to the minimum position. Otherwise, 
high-volume output may damage your hearing or equip-
ment.

CAUTION

• The PAD will be internally switched on or off when the HA 

gain is adjusted between -14 dB and -13 dB. Keep in mind 
that noise may be generated if there is a difference between 
the Hot and Cold output impedance of the external device 
connected to the INPUT connector when using phantom 
power.

NOTE

• If you want to use phantom power, you must first turn ON the 

+48V MASTER ON/OFF button located in the SYSTEM 
SETUP screen.

NOTE

Summary of Contents for LS9 Editor



































































































































































































































































































Reviews:

No comments

Related manuals for LS9 Editor

T.MIX DPM-1122 Owner'S Manual preview
DPM-1122
Brand: T.MIX Pages: 20
SoundCraft Delta Theatre User Manual preview
Delta Theatre
Brand: SoundCraft Pages: 58
Omnitronic PM-444USB User Manual preview
PM-444USB
Brand: Omnitronic Pages: 20
Harman Soundcraft Si impact User Manual preview
Soundcraft Si impact
Brand: Harman Pages: 132
LOOPTROTTER SATUR-8/24 Owner'S Manual preview
SATUR-8/24
Brand: LOOPTROTTER Pages: 9
Electrolux Dito XBMF20AXT3 Specifications preview
Dito XBMF20AXT3
Brand: Electrolux Pages: 4
Electrolux Dito XBM30 Brochure & Specs preview
Dito XBM30
Brand: Electrolux Pages: 4
Electrolux Dito XBMF20AST5 Specifications preview
Dito XBMF20AST5
Brand: Electrolux Pages: 4
Electrolux Dito XBMF30SX3 Specifications preview
Dito XBMF30SX3
Brand: Electrolux Pages: 4
IMG STAGELINE MMX-830 Instruction Manual preview
MMX-830
Brand: IMG STAGELINE Pages: 24
IMG STAGE LINE PMX-100 Instruction Manual preview
PMX-100
Brand: IMG STAGE LINE Pages: 18
IMG STAGE LINE MMX-142 Instruction Manual preview
MMX-142
Brand: IMG STAGE LINE Pages: 26
Eisele GTWS 740 Operating And Maintenance Instructions Manual preview
GTWS 740
Brand: Eisele Pages: 8
Eldom R113 User Manual preview
R113
Brand: Eldom Pages: 16
Biamp DJ 4001 Operator'S Manual preview
DJ 4001
Brand: Biamp Pages: 17
Biamp 4000 Operating Manual preview
4000
Brand: Biamp Pages: 15
Biamp 6702-B Operation Manual preview
6702-B
Brand: Biamp Pages: 22
Melissa 16200047 Manual preview
16200047
Brand: Melissa Pages: 45

Brands by name

Popular brands

Load more brands