Yamaha LS9 Editor, Owner'S Manual

Page: 224 / 290

224
Adjusting the input/output gain (Calibration function)
LS9-16/32 Owner’s Manual
If necessary, you can make fine adjustments to the input/output gain.
1
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power.
After the opening screen, the following startup menu
screen will appear.
1
INPUT PORT TRIM button
B OUTPUT PORT TRIM button
C SLOT OUTPUT TRIM button
2
In the MODE SELECT field, move the cursor
to one of the following buttons to select the
target you want to adjust, and press the
[ENTER] key.
●
INPUT PORT TRIM (fine adjustment of the ana-
log input gain) button
This makes fine adjustments in 0.1 dB steps to the gain
of the specified analog input port. When you press this
button, the screen will change as follows.
●
OUTPUT PORT TRIM (fine adjustment of the
output ports) button
This makes fine adjustments in 0.01 dB steps to the
gain of the specified output port. When you press this
button, the screen will change as follows.
●
SLOT OUTPUT TRIM (fine adjustment of the
output ports) button
This makes fine adjustments in 0.01 dB steps to the
output port gain of the specified slot. When you press
this button, the screen will change as follows.
3
Move the cursor to the desired knob in the
screen, and use the dial or the [DEC]/[INC]
keys to adjust the value.
If you move the cursor to the RESET ALL button in
the screen, and press the [ENTER] key, all knobs in
that screen will be reset to 0 dB (the factory-set default
value).
4
When you have finished making adjust-
ments, move the cursor to the EXIT button
and press the [ENTER] key.
The console will start up in normal operating mode.
Adjusting the input/output gain (Calibration function)
1
2
3
LS9-32
LS9-32
LS9-32
• Alternatively, you can continue by selecting a different menu
instead of using the EXIT button.
HINT