manualshive.com logo in svg

Yamaha LS9 Editor, Owner'S Manual

The Yamaha LS9 Editor is a powerful software tool designed for the Yamaha LS9 digital mixing console. Seamlessly integrate the console with your computer by downloading the free LS9 Editor installation manual from our website. This comprehensive manual provides step-by-step instructions to assist you in setting up and utilizing your LS9 console to its fullest potential.

Share
Download
background image

213

LS9-16/32  Owner’s Manual

20

Other functions

6

If you want to link specific parameters or 
events between two LS9 consoles, proceed 
as follows.

1

Move the cursor to the CASCADE LINK PORT 
field, and use the dial or the [DEC]/[INC] keys to 
specify the port that will transmit/receive control 
signals for cascade link.
The items you can select are the same as in the 
CASCADE OUT PATCH popup window (

→

 

p. 211).

B

Move the cursor to the CASCADE COMM LINK 
field, and use the dial or the [DEC]/[INC] keys to 
specify the item(s) you want to link, so that they 
match the settings of the cascade slave. The items 
you can select are the same as in the CASCADE 
OUT PATCH popup window (

→

 p. 211).

7

To close the INPUT PORT SELECT popup 
window, move the cursor to the CLOSE but-
ton (or the 

×

 symbol in the upper right) and 

press the [ENTER] key.

In this state, the bus signals of the cascade slave will 
be sent via the slot to the buses of the cascade master, 
and the combined signals of both buses will be output 
from the cascade master. If the Cascade Link function 
is enabled, the specified operations or parameter 
changes performed on either LS9 console will be fol-
lowed by the other LS9 console.

This section explains how to change the basic settings for MIX buses and MATRIX buses, such 
as switching between stereo and monaural, and selecting the position from which the signal is 
sent from an input channel.
The settings you make in the following procedure are saved as part of the scene.

1

In the DISPLAY ACCESS section, press the 
[SETUP] key repeatedly to access the SYS-
TEM SETUP screen.

1

BUS SETUP field

B

MIX button

C

MATRIX button

2

To make MIX bus settings, move the cursor 
to the MIX button of the BUS SETUP field 
and press the [ENTER] key.

The MIX BUS SETUP popup window will appear.

1

SIGNAL TYPE (Signal processing method)

This selects whether two adjacent odd-numbered/
even-numbered MIX buses will be used as stereo 
channels whose main parameters are linked (STE-
REO) or as two monaural channels (MONO 

×

 2).

• Control signals for cascade link and MIDI messages cannot 

share the same port. If you select a port that is already speci-
fied for transmission/reception of MIDI messages, a dialog 
box will ask whether it is OK to cancel the existing settings.

NOTE

Basic settings for MIX buses and MATRIX buses

2

1

3

LS9-32

1

2

3

Using cascade connections • Basic settings for MIX buses and MATRIX buses

Summary of Contents for LS9 Editor



































































































































































































































































































Reviews:

No comments

Related manuals for LS9 Editor

Panasonic AG-HMX100 Operating Instructions Manual preview
AG-HMX100
Brand: Panasonic Pages: 37
J. W. Davis & Company DMC-16 Specifications preview
DMC-16
Brand: J. W. Davis & Company Pages: 2
Hans Grohe Ecostat Comfort HQ Instructions For Use/Assembly Instructions preview
Ecostat Comfort HQ
Brand: Hans Grohe Pages: 72
Oster FPSTHMTJ-S Instruction Manual preview
FPSTHMTJ-S
Brand: Oster Pages: 8
Galanz GLSM07RDR08 User Manual preview
GLSM07RDR08
Brand: Galanz Pages: 7
Birko 1005004 Operating Instructions Manual preview
1005004
Brand: Birko Pages: 12
Grohe Europlus E 36 021 Manual preview
Europlus E 36 021
Brand: Grohe Pages: 82
Tesco BASICS TBHM14 User Manual preview
BASICS TBHM14
Brand: Tesco Pages: 28
Samson MDR 16 Specification Sheet preview
MDR 16
Brand: Samson Pages: 2
CAKEWALK Sonar V-STUDIO 100 Getting Started Manual preview
Sonar V-STUDIO 100
Brand: CAKEWALK Pages: 60
newform 62640C Instructions Manual preview
62640C
Brand: newform Pages: 12
Inter-m LM-6414 Operation Manual preview
LM-6414
Brand: Inter-m Pages: 16
Inter-m MX-1646D Operation Manual preview
MX-1646D
Brand: Inter-m Pages: 32
Black Diamond Equipment BDPM-30 Instruction Manual preview
BDPM-30
Brand: Black Diamond Equipment Pages: 10
AMX SX-100 User Manual preview
SX-100
Brand: AMX Pages: 5
Duronic HM3 Manual preview
HM3
Brand: Duronic Pages: 56
OBH Nordica Precision Mix Instruction Manual preview
Precision Mix
Brand: OBH Nordica Pages: 44
Duronic HM4 Manual preview
HM4
Brand: Duronic Pages: 23

Brands by name

Popular brands

Load more brands