manualshive.com logo in svg

Yamaha LS9 Editor, Owner'S Manual

The Yamaha LS9 Editor is a powerful software tool designed for the Yamaha LS9 digital mixing console. Seamlessly integrate the console with your computer by downloading the free LS9 Editor installation manual from our website. This comprehensive manual provides step-by-step instructions to assist you in setting up and utilizing your LS9 console to its fullest potential.

Share
Download
background image

62

Sending the signal from an input channel to a MIX bus

LS9-16/32  Owner’s Manual

Here we will explain how to send the signal of an input channel to MIX buses 1–16.
MIX buses are used mainly to send signals to on-stage foldback speakers or to external effect 
processors. Signals can be sent from an input channel to a MIX bus in the following three ways.

■

Using the SELECTED CHANNEL section

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 

In this method, you use the SELECTED CHANNEL section [SELECTED SEND] encoder to adjust the level of 
the signal sent to the MIX bus.
This method lets you control the signals sent from a specific input channel to all MIX buses.

■

Using a popup window

 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 

In this method, you use the MIX SEND popup window to adjust the send levels from eight channels to a MIX bus.
This method lets you control the send level, on/off setting, and send point for the signals sent from a set of eight 
channels to a specific MIX bus.

■

Using the top panel faders

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 

In this method, you switch the LS9 to SENDS ON FADER mode and use the top panel faders to adjust the send 
levels to the MIX bus. This method lets you simultaneously control the send levels and on/off switching for the sig-
nals sent from all input channels to a specific MIX bus.

Here’s how to use the SELECTED CHANNEL section 
[SELECTED SEND] encoder to adjust the level of the 
signals sent from a specific input channel to each MIX 
bus.

1

Make sure that an output port is assigned 
to the MIX bus to which you’re sending the 
signal, and that a monitor system or exter-
nal effect processor etc. is connected to the 
corresponding output port.

Refer to p.95 for details on assigning an output port to 
a MIX bus, or to p.42 for details on connecting exter-
nal equipment.

2

Press the SELECTED CHANNEL section 
[HOME] key.

The SELECTED CH VIEW screen will appear in the 
display.

1

TO MIX field

In this field you can switch the on/off status and adjust 
the send level of the signal sent from the input channel 
to the MIX bus.

B

TO MIX LEVEL knob

This adjusts the send level of the signal sent from the 
input channel to a VARI type MIX bus. To adjust the 
send level in this field, move the cursor to the knob 
and use the dial or the [DEC]/[INC] keys.

C

TO MIX ON/OFF button

If the send-destination MIX bus is a FIXED type, this 
button is displayed instead of the knob 

2

. This button 

is an on/off switch for the signal sent from the input 
channel to a FIXED type MIX bus. To turn the signal 
on/off, move the cursor to the button and press the 
[ENTER] key.

Sending the signal from an input channel to a MIX bus

Using the SELECTED CHANNEL sec-
tion

1

4

23

Summary of Contents for LS9 Editor



































































































































































































































































































Reviews:

No comments

Related manuals for LS9 Editor

Rane AM1 Operator'S Manual preview
AM1
Brand: Rane Pages: 8
Rane AM1 Datasheet preview
AM1
Brand: Rane Pages: 4
Pattfield Ergo Tools Betonmischer 120 Liter Pattfield Translation Of The Original Instructions preview
Betonmischer 120 Liter Pattfield
Brand: Pattfield Ergo Tools Pages: 52
QSC TouchMix-16 Self-Manuald Tour preview
TouchMix-16
Brand: QSC Pages: 26
HAGER WERKEN ALGIMIX Instructions For Use Manual preview
ALGIMIX
Brand: HAGER WERKEN Pages: 6
Phonic POWERPOD 410 User Manual preview
POWERPOD 410
Brand: Phonic Pages: 22
Zelmer fp1100 User Manual preview
fp1100
Brand: Zelmer Pages: 40
Sinbo SMX 2737 Manual preview
SMX 2737
Brand: Sinbo Pages: 50
Scarlett SC-HM40S19 Instruction Manual preview
SC-HM40S19
Brand: Scarlett Pages: 16
Scarlett SC-HM40S03 Instruction Manual preview
SC-HM40S03
Brand: Scarlett Pages: 13
Scarlett Silver Line SC-HM40S10 Instruction Manual preview
Silver Line SC-HM40S10
Brand: Scarlett Pages: 32
Electro-Voice ELX-1A Owner'S Operating And Service Instructions preview
ELX-1A
Brand: Electro-Voice Pages: 21
Fostex 350 Owner'S Manual preview
350
Brand: Fostex Pages: 18
Fostex X-30 Owner'S Manual preview
X-30
Brand: Fostex Pages: 40
Bartscher FP 1000 Manual preview
FP 1000
Brand: Bartscher Pages: 19
Edirol V-1 Brochure preview
V-1
Brand: Edirol Pages: 1
Rane MP2015 Instruction Manual preview
MP2015
Brand: Rane Pages: 28
Oxford Benchmate VM-M Manual preview
Benchmate VM-M
Brand: Oxford Pages: 12

Brands by name

Popular brands

Load more brands