24
Genos Reference Manual
High Key/Note
Limit
Adjusts the Octave of the notes converted via the NTT and NTR.
High Key
This sets the highest key (upper octave limit) of the note transposition for the
chord root change. Any notes calculated to be higher than the highest key are
transposed down to the next lowest octave. This setting is available only when the
NTR parameter (
) is set to “Root Trans.”
Note Limit Low
These set the note range (highest and lowest notes) for Voices recorded to the
Style channels. By judicious setting of this range, you can ensure that the Voices
sound as realistic as possible—in other words, that no notes outside the natural
range are sounded (e.g., high bass sounds or low piccolo sounds).
Note Limit High
RTR (Retrigger
Rule)
These settings determine whether notes stop sounding or not and how they change pitch in response to chord
changes.
Stop
The notes stop sounding.
Pitch Shift
The pitch of the note will bend without a new attack to match the type of the new
chord.
Pitch Shift to Root
The pitch of the note will bend without a new attack to match the root of the new
chord. However, the octave of the new note remains the same.
Retrigger
The note is retriggered with a new attack at a new pitch corresponding to the next
chord.
Retrigger To Root
The note is retriggered with a new attack at the root note of the next chord. How-
ever, the octave of the new note remains the same.
The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation (step 7
on
).
Example—When the highest key is F.
Root changes
Notes played
Example—When the lowest note is C3 and the highest is D4.
Root changes
Notes played
High Limit
Low Limit
NOTICE
