Yamaha genos Reference Manual Download Page 68

Page: 68 / 154

Genos Reference Manual



MIDI Multi Recording Display Structure

The MIDI Multi Recording display is the portal display for Multi Recording and can be called up via [RECORDING]



MIDI [Multi Recording].

Audio data such as the rhythm channels created via the audio data of Audio Link Multi Pad and Audio Songs cannot be recorded to the MIDI Songs.

Save

For saving the edited Song.

Step Edit

For creating or editing a Song via Step Recording. For details, see

page 77

Setup

For selecting the panel setups to be recorded to the top position of the Song. For details, see

page 73

New

For calling up a blank Song.

For calling up the Mixer display or setting the playback volume of the currently recorded Song for
adjusting the balance when recording other channels.

Song name

Indicates the current Song name. Touching this calls up the Song Selection display for selecting a
MIDI Song.

Bar. Beat

Indicates the current measure number and the beat.

Rec Mode

Indicates the Recording Mode (

page 71

), which can be set from the display called up by touching

here.

Metronome

For turning the metronome on/off.

Channels

For specifying the channels to be edited.

Song Control

For controlling Song playback or recording.

Functions

For editing channel events. For details, see

page 74

The MIDI Multi Recording display can also be called up via [MENU]



[Song Recording]



MIDI [Multi Recording].

Entering the Recording mode resets the MIDI Song selection in the Song Player display and a MIDI Song cannot be selected.

The Style Retrigger function (

page 130

) cannot be used when you are overdubbing to existing data.

NOTE

w e r t

NOTE

Summary of Contents for genos



























































































































































Search results

Summary of Contents for genos

Reviews:

Related manuals for genos

Brands by name

Popular brands

Yamaha genos, Reference Manual

Search results

Summary of Contents for genos

Reviews:

Related manuals for genos

Brands by name

Popular brands