Yamaha genos Reference Manual Download Page 140

Page: 140 / 154

140

Genos Reference Manual

Functions that Respond to On/Off Input

No Assign

No function is assigned.

Sustain

Sends Sustain on/off messages for the keyboard parts.

Sostenuto

Sends Sostenuto on/off messages for the keyboard parts.

Soft

Sends Soft on/off messages for the keyboard parts.

Portamento

Sends Portamento on/off messages for the keyboard parts.

Modulation (Alt) Right 1–3, Left

Applies modulation effects to the part, in which the effects (waveform) are alternately turned
on/off by each on/off message.

Articulation 1/2/3 Right 1–3, Left

Applies the Super Articulation 1, 2 or 3 effect to the part.

Effect Right 1–3, Left, Mic

Turns the Insertion Effect applied to the part on/off.

Kbd Harmony/Arpeggio On/Off

Same as the [HARMONY/ARPEGGIO] button.

VH Harmony On/Off

Switches “Harmony” in the Vocal Harmony display on and off (

page 110

)

VH Effect On/Off

Switches “Effect” in the Vocal Harmony display on and off (

page 113

Talk

Same as the [TALK] button.

Score Page +, -

While the Song is stopped, this lets you turn to the next/previous score page (one page at a
time).

Lyrics Page +, -

While the Song is stopped, this lets you turn to the next/previous lyrics page (one page at a
time).

Text Viewer Page +, -

Turns to the next/previous text page (one page at a time).

Song A Play/Pause

Same as the [

] (PLAY/PAUSE) button for Song A.

Song B Play/Pause

Same as the [

] (PLAY/PAUSE) button for Song B.

Style Start/Stop

Same as the STYLE CONTROL [START/STOP] button.

Tap Tempo

Same as the [TAP TEMPO] button.

Synchro Start

Same as the [SYNC START] button.

Synchro Stop

Same as the [SYNC STOP] button.

Intro 1–3

Same as the INTRO [I]–[III] buttons.

Main A–D

Same as the MAIN VARIATION [A]–[D] buttons.

Fill Down

Plays a fill-in, which is automatically followed by the Main section of the button on the imme-
diate left.

Fill Self

Plays a fill-in.

Fill Break

Plays a break.

Fill Up

Plays a fill-in, which is automatically followed by the Main section of the button on the imme-
diate right.

Ending 1–3

Same as the ENDING/rit. [I]–[III] buttons.

Fade In/Out

Turns the Fade In /Fade Out function of Style/MIDI Song playback on/off.

Fingered/Fingered On Bass

Alternately switches between the “Fingered” and “Fingered On Bass” modes (

page 8

Bass Hold

Lets you hold the Style bass note even if the chord is changed during Style playback.

Percussion 1–3

Plays a percussion instrument.

Right 1–3, Left Part On/Off

Same as the PART ON/OFF buttons.

One Touch S, -

Selects the next or previous One Touch Setting number.

One Touch Setting 1–4

Same as the ONE TOUCH SETTING [1]–[4] buttons.

Regist Se, -

Advances or reverses the Registration Sequence.

Regist 1–10

Same as the REGISTRATION MEMORY [1]–[10] buttons.

Summary of Contents for genos



























































































































































Search results

Summary of Contents for genos

Reviews:

Related manuals for genos

Brands by name

Popular brands

Yamaha genos, Reference Manual

Search results

Summary of Contents for genos

Reviews:

Related manuals for genos

Brands by name

Popular brands