Yamaha BRUIN 350 Owner'S Manual Download | Manualshive

Page: 63 / 174

background image

6-10

EBU00221

Accessories and loading

EBU00222

Accessories

Accessories can affect the handling and con-
trol of your ATV. Keep the following in mind
when considering an accessory or operating
an ATV which has accessories.

●

Choose only accessories designed for your
ATV. Your Yamaha dealer has a variety of
genuine Yamaha accessories. Other ac-
cessories may also be available on the
market. However, it is not possible for
Yamaha to test all non-Yamaha accesso-
ries, nor have any control over the quality or
suitability of them. Choose a genuine
Yamaha accessory, or one that is equiva-
lent in design and quality.

●

Accessories should be rigidly and securely
mounted. An accessory which can shift po-
sition or come off while you are riding could
affect your ability to control the ATV.

●

Do not mount an accessory where it could
interfere with your ability to control the ATV.
Examples include (but are not limited to) a
heavy or bulky object attached to the han-
dlebars which could make steering difficult,
an accessory that limits your ability to move
around on the seat, or one that limits your
view.

●

Use extra caution when riding an ATV with
accessories. The ATV may handle differ-
ently than it does without accessories.

U5UH10.book Page 10 Monday, July 28, 2003 5:15 PM

«
...
61
62
63
64
65
...
»

Summary of Contents for BRUIN 350















































































































































































Reviews:

No comments

Related manuals for BRUIN 350

Brand: MANCO Pages: 8

Brand: Wacker Neuson Pages: 138

Brand: Yamaha Pages: 176

Brand: Arctic Cat Pages: 68

Brand: Irbis Pages: 99

Brand: Baja motorsports Pages: 69

Off Road Utility Vehicle 4430

Brand: Bush Hog Pages: 82

Brand: DAELIM Pages: 1

Brand: ODES Pages: 97

Brand: Landoll Pages: 88

Brand: Jeep Pages: 16

Roadster RT-622 2010

Brand: Can-Am Pages: 52

Brand: Ravenna Pages: 33

Brand: Yamaha Pages: 841

GRIZZLY 700 2013

Brand: Yamaha Pages: 174

Brand: Yamaha Pages: 173

Brand: Yamaha Pages: 185

Brand: CADDY Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands