Yamaha AW 16G, Owner'S Manual

Page: 94 / 219

Mixdown and bounce operations
94
1 Immediately after recalling a read-only library
that contains dynamics settings, turning the
[DYN] knob will simultaneously adjust multi-
ple parameters to affect the dynamics pro-
cessing. (The amount of change will depend
on the last-recalled library.)
B For a channel for which you edited even one
parameter in the EDIT page of the DYN
screen, turning the [DYN] knob will adjust
only the last-edited parameter. (The last-
edited parameter is remembered for each
channel.)
C
If you once again recall a read-only library
that contains dynamics settings, turning the
[DYN] knob will again simultaneously adjust
multiple parameters.
Editing the parameters of an
internal effect
By using the EDIT page of the EFF1 screen or EFF2
screen, you can make detailed edits to the effect parame-
ters of the internal effects 1 and 2.
If an effect is internally connected via send/return in the
mixer section, the parameters (EQ, pan, AUX send, etc.)
of the return channel that processes the return signal can
also be edited in this page.
As an example, here’s how you can edit the settings of
internal effect 1, internally connected via send/return.
1
For internal effect 1, recall an effect library
that uses the desired effect type.
You cannot change the effect type (e.g., reverb,
delay) in the EDIT page. You must first recall library
settings that use the desired type.
2
In the Selected Channel section, repeatedly
press the [EFF1] knob or hold down the
[EFF1] knob and use the CURSOR [
]/[ ]
keys to access the EDIT page of the EFF1
screen.
The EDIT page lets you edit all of the effect parame-
ters.
1 BYPASS ON/OFF button
Switches effect bypass on/off. The effect will not be
heard if this button is on.
B TYPE
Indicates the type of the currently selected effect.
Note Note
You cannot change the effect type in this page. If you
want to use a different type, you must recall library set-
tings that use the desired effect type.
C STEREO/MONO
Indicates whether the effect is stereo or monaural. A
stereo-input effect is indicated by
, and a monau-
ral-input effect is indicated by .
D USED AS
Indicates how this effect is being used. If the effect
is internally connected to the mixer section via
send/return, this will indicate “EFF1” or “EFF2.” If
the effect is inserted into a specific channel, this
will indicate the name of the channel into which
the effect is inserted (e.g., “INPUT 1”).
1 5
2 3 4