Yamaha AW 16G, Owner'S Manual

Page: 71 / 219

71
V
arious types of pla
ybac
k
7
Finding a location while you listen to the
sound (the Nudge function)
“Nudge” is a function that repeatedly plays a short region
before or after the current location. By using the Nudge
function, you can find a precise location while listening
to the playback. This is useful when you need to specify a
location precisely, such as when specifying the auto
punch-in/out points, or when editing the contents of a
track.
1
Locate to the vicinity of the point you want
to find.
2
With the transport stopped, press the [JOG
ON] key.
The [JOG ON] key will light, and the Nudge func-
tion will be turned on. A fixed region (referred to as
the “nudge time”) starting at the current location
will play repeatedly.
3
To move the current location forward, turn
the [DATA/JOG] dial toward the right. To
move the current location backward, turn
the [DATA/JOG] dial toward the left.
If time display is selected as the counter display for-
mat, you can move the current location forward or
backward in millisecond units. If time code display
is selected, you can move in sub-frame units.
Tip! Tip!
Even while using the Nudge function, you can use locate
points or markers to change the location, or register
locate points or markers (
→
p. 65).
4
To turn off the Nudge function, press the
[JOG ON] key or the transport section STOP
[
■
] key.
The [JOG ON] key will go dark, and the Nudge
function will be turned off.
5
If you want to change the playback duration
or the playback mode, repeatedly press the
Work Navigate section [UTILITY] key or hold
down the [UTILITY] key and use the CURSOR
[
]/[ ] keys to access the PREFER page of
the UTILITY screen.
1 NUDGE MODE
Specifies the region of sound (before or after the
current location) that will be played by the Nudge
function.
B NUDGE TIME
Specifies the duration of the region that will be
played by the Nudge function.
6
To change the playback duration (nudge
time), move the cursor to the value of the
NUDGE TIME field, and use the [DATA/JOG]
dial to set the nudge time.
You can set the nudge time in a range of 25 ms –
800 ms. (Default = 500 ms).
7
To change the playback position (nudge
mode), move the cursor to the NUDGE
MODE button, and press the [ENTER] key to
switch between the following two nudge
modes.
●
AFTER
Repeatedly play for the duration of the nudge time,
starting at the current location (default).
●
BEFORE
Repeatedly play for the duration of the nudge time,
ending at the current location.
Note Note
You cannot change the nudge time or nudge mode while
using the Nudge function. You must turn off the Nudge
function, and change these settings while the [JOG ON]
key is dark.
Current
location
Nudge time
Song
track
1 2
NUDGE MODE: BEFORE NUDGE MODE: AFTER
Current location Current location