Yamaha AW 16G, Owner'S Manual

Page: 66 / 219

Various types of playback
66
The following procedure shows how to register the
current location in one of the locate points, and then
move the song to that locate point.
1
Move the song to the point that you want to
register as a locate point.
You can set a locate point whether the song is play-
ing or stopped.
2
Hold down the [SET] key and press the key
for the desired locate point.
The locate points correspond to the following keys.
[IN] key ...................... In point
[OUT] key .................. Out point
[A] key ....................... A point
[B] key ........................ B point
RTZ [ ] key ......... Relative Zero point
Note Note
• If you want to change the Start point or End point, use
the SONG screen POINT page. These points cannot be
set by key operations.
• The In point and Out point will be updated automati-
cally when you perform a recording operation.
3
To move to a locate point you registered,
press the corresponding key while the song is
stopped or playing.
The song will move to that location, and an icon
will appear at the left side of the counter to indicate
the currently selected locate point.
This icon will remain visible until you play or
rewind/fast-forward past the previous or next locate
point or marker location.
Locate points that you register are displayed in the
TRACK screen VIEW page or PAD page as shown
below.
Tip! Tip!
• Locate point settings are stored on the hard disk as part
of the song.
• Locate points can be adjusted as desired (
→
p. 68).
Locate points other than the Start point and End point
may also be erased (
→
p. 69).
In point
A point
Relative Zero
point
B point
Out point
Locator icon
Locator icon