3-16
GB
8)
Press in and hold the main switch to
operate the remote choke
system.(The remote choke switch
returns to its home position when
you release your hand. Therefore,
keep the switch pressed in.)
NOTE:
8
It is not necessary to use the choke
when the engine is warm.
8
Set the choke knob to the home posi-
tion, or the remote choke system will
not operate.
9)
Turn the main switch to “START”,
and hold it for a maximum of 5 sec-
onds.
10) Immediately after the engine starts,
release the main switch to return it to
“ON”.
c
C
8
Do not turn the main switch to
“START” when the engine is running.
8
Do not keep the starter motor turning
for more than 5 seconds with the main
switch in the “START” position. If the
engine does not start within 5 seconds,
return the main switch to “ON”, wait
10 seconds, and then crank the engine
again. (If you continuously run the
starter motor for more than 5 seconds,
the starter can be damaged. The bat-
tery will also run down quickly, making
it harder to start the engine.)
ON
START
OFF
701056
ON
START
OFF
703025
64C-9-76 (E,F,ES) 3B 4/25/0 3:05 PM Page 96
Summary of Contents for 100A
