Chapter 1 – Introduction
1-3
•
9457-RFC 19" Rack filler panel with cutout for front-mounted floppy drive.
*These peripheral devices are not CE compliant.
About this Manual
This manual describes the 9457 Industrial PC/AT computer system. As the 9457 sup-
ports a variety of processor and peripheral options, refer to the documentation that ac-
companied the particular processor board or peripheral for information specific to that
component.
Unpacking the System
The 9457 is shipped in two cartons. One contains the computer module, and the other the
monitor. As you remove each from its shipping carton, verify that you have the parts
listed below. It is a good idea to save the boxes and inner wrapping in case you need to
reship the units.
The 9457 computer module carton contains
•
9457 computer module
•
Documentation kit, which includes
•
Power cable
•
Diagnostic software disk
•
Processor card manual
•
Display drivers disk
•
9457 user manual
•
Business reply card
If you ordered operating system software, you will receive operating system disks and
manuals.
The monitor module carton should contain
•
9457 monitor module
•
3-foot (914.4 mm) monitor power cable
•
18-inch (457.2 mm) video cable
•
24-inch (609.6 mm) Host/LED cable
•
2 steel half-clamps
•
14 - #10-32 nuts
•
1 - #6-32 screw
If you ordered the system with a touch screen installed, you will receive
•
Touch screen driver disk and manual
