9457 Industrial Computer
3-10
100-120
V ~ 3A
M AX .
200-240
V ~ 3A M
AX .
50/60H
z
Figure Chapter 3 -6. 5.25" Drive Mounting Plate Retainer Screw Locations
5.
Remove the 5.25" drive mounting plate from its position on top of the power supply.
6.
Use a screwdriver to pry out the 5.25" drive bay’s knockout panel out. Remove and
discard the knockout panel.
Caution
To avoid injury, be sure to completely remove the knockout tabs from the module
chassis and dress the opening with a file to completely remove any burrs. Take care to
ensure that metal filings do not contaminate the interior of the computer module case.
7.
Mount the drive to the drive mounting plate by installing four screws through the
drive mounting plate into the bottom of the drive.
