9457 Industrial Computer
4-6
Suspend Mode
In this mode, the monitor consumes less than 30 Watts. The monitor enters Suspend
mode, shutting down its internal horizontal timers, after it has been in Standby mode for
five seconds. From Suspend mode, it may take up to three seconds for the monitor to re-
turn to Normal mode.
Degaussing the Monitor
Under normal operating conditions, the monitor should not require manual degaussing,
since it is automatically degaussed each time the monitor is powered up. However, if you
should wish to manually degauss the monitor, follow these steps:
1.
Turn on the computer and operate both it and the monitor for at least 30 minutes.
2.
Depress the Degauss button (
), located on the rear panel. The monitor will de-
gauss itself automatically.
Once you have degaussed the monitor, you will be unable to degauss it again until you
have operated the monitor for 30 minutes.
