9457 Industrial Computer
6-2
Care of the 9457 Cabinet
Caution
Never clean the 9457 while power is on. Disconnect the monitor power cord before
cleaning. Avoid spraying liquids into the ventilation slots.
Do not use screen cleaning products that are abrasive or are designed to leave a coat-
ing or residue, such as “anti-static screen coatings.” These products may damage the
anti-reflective treatment on the screen face.
Never use petroleum-based or abrasive cleaners.
To clean the exterior of the 9457, dampen a soft cloth with a mild cleaning solution, such
as dishwashing detergent. After cleaning, rinse the cloth thoroughly, wring dry, and then
wipe cleaned surfaces to remove any residual detergent.
Use a non-residue cleaner such as a mild window-cleaning solution to clean the monitor
screen. Take care not to scratch or mar the anti-reflective treatment on the screen.
Changing the Fan Filters
To change fan filters, remove the grilles and filters as illustrated in Figure Chapter 6 -1.
Clean or replace the filters and snap the grilles back into position.
Caution
Do not operate the 9457 without either of the fan filters. Dust build-up could cause
the unit to malfunction.
