Chapter 5 – Programmable Keypad Utility Program
5-7
4.
The last character of every macro is the end of the macro (EOM) and cannot be de-
leted.
Copy
Copies a sequence of scan codes from the macro into memory. To select the section to
copy:
1.
Place the cursor on the first character to copy. Press
F
1
and select
Copy
.
2.
Press
ENTER
. Copy should still be highlighted, but the cursor will appear on the Edit
line.
3.
Move the cursor on the last character to copy and press
ENTER
.
The copied item does not appear on the screen until you select
Paste
.
Paste
Inserts a sequence of scan codes (which were saved in memory using Copy) into the
macro. To paste a sequence of scan codes that were previously copied, position the cur-
sor where you want the text to appear and then press
F
1
. Select
Paste
and then press
ENTER
.
Codes
Displays a table of keys and their scan codes in Hex. See Codes section in this chapter
for a complete code listing.
Hex/Decimal
Toggles between displaying the scan codes in Hex and Decimal formats.
Insert
Toggles between insert and overtype mode.
Upload Menu
Use the Upload Menu to choose which keypad macro information to load. Choices in
this menu are Function keypad, Numeric keypad, Keyboard, PKIM version, and Exit.
Function Keypad
Commands the PKIM to send its entire macro set for the function key keypad.
Numeric Keypad
Commands the PKIM to send its entire macro set for the numeric key keypad.
