Xerox WorkCentre 4260 Series, System Administration Manual

Page: 67 / 210

Apple Mac
Xerox WorkCentre 4260 Series System Administration Guide 55
12. Once the Mac has restarted, click on the [Apple] icon, then [Chooser] .
13. Select the printer icon and then click on the [Printer Name] which corresponds to the
name given to the machine in AppleTalk Settings - Name.
14. Click on [Create] .
15. Click on the [Printer Description] which matches your machine model.
16. Click on [Select] .
17. Click on [Setup] .
18. Click on [Configure] .
19. Select the installed options which correspond to your machine configuration.
20. Click on the [OK] button.
21. Click on the [OK] button and close the [Chooser] .
22. Print a document from an application to verify that the printer is installed correctly.
Configure your Apple Mac Print Driver
Information Checklist
Before starting the Installation procedure, please ensure that the following items are
available and/or the tasks have been performed:
1. The WorkCentre 4260 printer driver should be installed on your Macintosh operating
system.
Procedure
Configuration
1. Click on [Printer Setup Utility] on the Dock and go to step 6, or:
2. Double-click on the hard drive icon on the desktop.
3. Double-click on [Applications] .
4. Double-click on [Utilities] .
5. Double-click on [Printer Setup Utility] .
6. Select the printer and click on [Show Info] .
7. Click on [Installable Options] .
8. Select the options as installed on your device.
NOTE: If you want to use the Save Job for Reprint feature, ensure Job Storage is set
to [Installed] .
9. Click on the [Apply Changes] button.
10. Click on the [Close] button.