Xerox WorkCentre 4260 Series, System Administration Manual

Page: 36 / 210

3 Network Installation
24 Xerox WorkCentre 4260 Series System Administration Guide
2. Enter the Administrator’s Password . The default is 1111 .
3. Touch [Enter] .
4. Press the <Machine Status> button.
5. Touch the [Tools] tab.
6. Touch [Connectivity and Network Setup] .
7. Touch [Advanced] .
8. Touch [Network Setting] .
9. Touch [Network Setup] .
10. Touch [NetWare] .
11. Touch [Protocol] .
12. Touch [Enable] .
13. Touch [Save] .
14. Touch [Frame Type] .
15. Select the Frame Type desired by touching the frame type buttons, then touch
[Save] .
16. Touch [NDS Settings] .
17. Touch [Name Context] .
18. A default name will appear.
Novell suggests using typeful names when entering Name Context and Directory
Service Tree information, for example:
cn=contextname.ou=organization.o=company.c=country.
19. Touch [abc] to switch between capitals and lowercase characters.
20. When you are finished, touch [Save] .
21. Touch [Directory Service Tree] .
22. Enter a directory tree and context for the machine in the NDS Tree Name and NDS
Context . When you have finished, touch [Save] twice to accept the changes.
23. Touch [Print Server] .
24. Touch [Print Server Name] and use the touch screen keyboard to enter the name
you assigned to your print server. When finished touch [Save] .
25. Touch [Print Server Password] . Use the on screen keyboard to enter the print server
password, in the correct case you recorded when you setup your print server and
touch
[Save] .
26. Touch [Save] to exit the [Print Server] screen and accept your changes.
27. Optional Step:
• If you wish to change the desired SAP rate or Poll Interval for your printer or set
the
Primary File Server, touch [Rates] .