Xerox WorkCentre 4260 Series, System Administration Manual

Page: 21 / 210

CentreWare Internet Services
Xerox WorkCentre 4260 Series System Administration Guide 9
Setting the Ethernet speed at the machine
1. Press the <Log In/Out> button on the machine to enter the Tools Pathway.
2. Enter the Administrator’s Password . The default is 1111 .
3. Touch [Enter] .
4. Press the <Machine Status> button.
5. Touch [Tools] .
6. Touch [Connectivity and Network Setup] .
7. Touch [Advanced] .
8. Touch [Network Setting] .
9. Touch [Physical Media] .
10. Select the Speed to match the speed set on your hub or switch.
11. Touch [Save] .
12. Press the <Log In/Out> button.
13. Touch [Confirm] to exit the Tools Pathway.
Printing a Configuration Report
Follow these steps to print a Configuration Report:
1. Press the <Machine Status> button on the Control Panel.
2. Touch the [Information Pages] tab.
3. Touch [System Configuration] .
4. Touch [Print] .
5. Touch [Close] .
CentreWare Internet Services
CentreWare Internet Services is the embedded HTTP server application that resides in the
device. Internet Services allows Administrators to change network and system settings on
the device from the convenience of their desktops.
Many features available on your machine will need to be set via the machine and the
CentreWare Internet Service.
Many of the features available within Internet Services will require an Administrator
Username and Password. The default Username is
admin and the default Password is 1111 .
System Configuration
To use CentreWare Internet Services, you need to enable both TCP/IP and HTTP on the
machine. See
Configure Static Addressing using the Machine on page 13 , or Configure
Dynamic Addressing on page 15 .