Xerox WorkCentre 4260 Series, System Administration Manual

Page: 34 / 210

3 Network Installation
22 Xerox WorkCentre 4260 Series System Administration Guide
• IPX Socket Number: Enter the IPX socket number of the SNMP agent.
• SNMP Version: Select the SNMP version of the SNMP agent.
Traps:
• TRAP Community Name: Enter the trap community name of the SNMP agent.
• Trap to be Received: Select the types of traps to receive from the SNMP agent.
• Delete – Selecting a trap on the [SNMP Configuration > Advanced] page and clicking
this button deletes the trap. You can select and delete multiple traps at once.
SSDP
Allows you to configure the SSDP protocol settings as follows:
• Protocol – Displays whether the protocol is enabled or disabled.
• Time to Live – Specify the maximum TTL (time to live).
AppleTalk
Information Checklist
Before starting the installation procedure, please ensure that the following items are
available and/or the tasks have been performed:
1. Existing operational AppleTalk network .
2. AppleTalk Name to assign to your printer.
3. AppleTalk Zone (if used) where your printer will reside.
Procedure
Setup AppleTalk at the machine
1. Press the <Log In/Out> button on the machine to enter the Tools Pathway.
2. Enter the Administrator’s Password . The default is 1111 .
3. Touch [Enter] .
4. Press the <Machine Status> button.
5. Touch the [Tools] tab.
6. Touch [Connectivity and Network Setup] .
7. Touch [Advanced] .
8. Touch [Network Setting] .
9. Touch [Network Setup] .
10. Touch [AppleTalk] .
11. Touch [Protocol] .
12. Touch [Enable] .