Xerox WorkCentre 4260 Series, System Administration Manual

Page: 124 / 210

12 Network Accounting
112 Xerox WorkCentre 4260 Series System Administration Guide
4. Install and configure the Xerox-certified Network Accounting Solution Package on
your network. Refer to the manufacturer's instructions with the network accounting
package to complete this task.
5. Test communication between the accounting server and the machine:
a) Go to your Network Accounting Server.
b) Open a web browser and enter the IP Address of the machine in the [Location] or
[Address] field.
c) Press [Enter] .
d) The machine’s Internet Services web pages should appear.
6. If you do not have a web browser, test connectivity by pinging the IP address of the
machine from your Network Accounting Server.
Insert the Feature Enablement Key
1. Insert the Feature Enablement Key in the card reader at back of the machine.
2. Follow the instructions with the Feature Enablement Key to enable the Network
Accounting option.
3. Remove the Feature Enablement Key when instructed to do so and store it in a safe
location.
Enable Network Accounting from the Machine
1. Press the <Log In/Out> button on the machine to enter the Tools Pathway.
2. Enter the Administrator’s Password . The default is 1111 .
3. Touch [Enter] .
4. Press the <Machine Status> button.
5. Touch [Tools] .
6. Touch [Accounting] .
7. Touch [Accounting Enablement] .
8. Touch [Authentication Mode] .
9. Touch [On] under the Network Accounting option.
10. Touch [Save] .
11. Press the <Log In/Out> button.
12. Touch [Confirm] to exit the Tools Pathway.