Xerox Phaser 6200B, Service Manual

Page: 339 / 386

Theory of Operation 321
6. Gear Feed : See Paper Pick Rollers.
7. Spring Feed: See Paper Pick Rollers.
8. Gear Idler Feed: See Paper Pick Rollers.
9. Feed Solenoid:
Controls the operation (rotation/stop) of the Feed Roller
Assembly by controlling the rotations of the Gear Feed.
10.Low Paper Sensor:
The actuator lowers as print media is used in the tray.
When the actuator lowers to a pre-determined postion, it blocks the sensor beam to
trigger a low paper status. The actuator position can be seen from the front of the
paper tray allowing confirmation of the print media quantity.
11.Paper Feed Roll: See paper Pick Rollers.
12.Roll Turn Assembly: The roll turn assembly receives drive energy from the
main drive through the turn clutch and transports the print media out of the paper
tray to the registration roller.
Note: Tray 1 paper pick assembly has a different part number than
the HCF tray 2 and tray 3 paper pick assembly.
High-Capacity Feeder - Trays [2] [3]
5
9
4
2
11
3
12
12
11
3
2
4
9
5
S6200-061