Xerox Phaser 6200B, Service Manual

Page: 129 / 386

Test Prints, Adjustments and NVRAM 111
Analyizing the Test Pattern Sample
Things to look for
1. Color Registration (Horizontal): The colored lines should match up. Perform the
color registration procedure. See “Color Calibration” on page 112.
2. Color Registration (Vertical): The colored lines should match up. Clean the CTD
sensor and cycle power to the printer to correct.
3. Uniform RGB: The secondary color squares should be uniformly colored with no
mottling.
4. Density: The color bars should have even density from top to bottom.
5.
Margins: Should be 8mm from the edge of the paper to the line.
6. Image Size: the image height should be 261 mm between the top and bottom lines.
The image width should be 192 mm between the left and right lines.
Note: Some of the graphics on this page contain composite black
with heavy fill images exceeding 240% coverage. Transfer
roll offsetting may occur as a result.
S6200-223
Test Pattern A 600 x 600
Test Pattern A 600 x 600
P 6200 P 6200 P 6200 P 6200
P 6200 P 6200 P 6200 P 6200
P 6200 P 6200
P 6200 P 6200
P 6200 P 6200
P 6200 P 6200
P 6200 P 6200 P 6200 P 6200
P 6200 P 6200 P 6200
8 mm
8 mm
Abc Defg Hijk
Abc Defg Hijk Lmnop
Qrstuvw XYZ
123456789
Abc Defg Hijk Lmnop
Qrstuvw XYZ 123456789
261 mm
192 mm
4
6
3
2
1
5
6
6