Xerox Phaser 6200B, Service Manual

Page: 273 / 386

FRU Parts List 255
Using the Parts List
1. No. = The callout number from the exploded part diagram.
2.
Part Number = The material part number used to order specific parts.
3. Qty = This number represents the parts per printer, not the number of parts
supplied in the actual part order.
4.
Name/Description = Details the name of the part to be ordered and the number of
parts supplied per order.
5. Parts identified throughout this manual are referenced PL#.#.# ; For example,
PL3.1.10 means the part is item 10 of Parts List 3.1.
6. A black triangle preceding a number followed by a parenthetical statement in an
illustrated parts list means the item is a parent assembly, made up of the individual
parts called out in parentheses.
7. The notation “ with X~Y ” following a part name indicates an assembly that is
made up of components X through Y. For example, “1 (with 2~4)” means part 1
consists of part 2, part 3, and part 4.
8. An asterisk (*) following a part name indicates the page contains a note about this
part.
9. The notation (NS) next to a part indicates that pariticular part is not spared, but
contained in a kit or major assembly.
10. The notation “ J1<>J2 and P2 ” is attached to a wire harness. It indicates that
connector Jack 1 is attached to one end of the wire harness and connector J2 is
attached to the other end that is plugged into P2.
Note: Only parts showing part numbers are available for support.
Parts not showing part numbers are available on the parent
assembly.
Legend:
Identifier Meaning
C C-ring
E E-ring
KL K-clip
S Screw