Xerox Phaser 6200B, Service Manual

Page: 131 / 386

Test Prints, Adjustments and NVRAM 113
Color Registration
This procedure must be performed whenever the
Laser Unit has been removed or replaced.
The Color Registration Menu allows you to
adjust the printer's cyan, magenta and yellow
against black to ensure that the colors are
properly aligned.
You can adjust the settings from -7 to +7 units.
(left to right). See the images on the left.
0 is always the printer's current color
registration setting.
Print the Color Registration page from the
printer’s front panel Printable Pages Menu.
Margin Calibration
The Calibrate Margins Menu allows you to adjust the printer’s imaging area relative
to the edges of the paper. The imaging area is shown as a dashed rectangle on the
front side of the print, the printer will not print outside this rectangle. The dashed
rectangle should line up with the solid rectangle printed on the back side of the page.
Hold up to strong light for verification.
Print the
Calibrate Margins Page
from the printer’s front panel
Improve
Print Quality Menu
and follow the instructions detailed on the page.
S6200-226
-7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7
-7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7
-7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7