Xerox Phaser 6200B, Service Manual

Page: 133 / 386

Test Prints, Adjustments and NVRAM 115
Restore Factory Settings (Margins)
You can reset margin settings to the factory-default values.
Caution Use caution when resetting your margins to the
factory-default settings. Changing these settings back to
factory defaults may not be the last-saved settings if you
have previously calibrated your margins.
1.
From the Main Menu, highlight Support and press OK.
2. Highlight Improve print-quality and press OK.
3. Highlight Calibrate Margins Menu and press OK.
4.
Highlight Restore Factory Settings and press OK.
5.
Highlight Restore Factory Settings and press OK to reset the margin settings.
Reset Calibrations (color and margins)
Note: Resetting calibrations resets the color and margin settings.
1.
From the Main Menu, highlight Support and press OK.
2. Highlight Improve print-quality and press OK.
3. Highlight Reset Calibrations NOW and press OK to reset the color, margins and
paper (transfer) settings to factory defaults.
Resetting job defaults
Resetting the job defaults resets the paper source, print-quality mode, 2-sided
printing, image smoothing and tekcolor corrections to their default values.
1.
From the Main Menu, highlight Print Setup Menu and press OK.
2. Highlight Job Defaults Menu and press OK.
3. Reset Job Defaults is displayed, press OK.
4. Highlight Reset Job Defaults NOW and press OK to reset the job defaults.
Resetting Printer setup values to default
Resetting the Printer setup values resets the job defaults, front panel language,
Intellegent ready, MPT Tray setup, Tray 1 -3 setup, startup page, front panel intensity,
front panel contrast, PostScript error information and energy star to their default
values.
1. From the Main Menu, highlight Network Setup Menu and press OK.
2. Highlight Reset Network Setup and press OK.
3. Reset Network Setup NOW is displayed, press OK.