![background image](http://html.mh-extra.com/html/xerox/docuprint-p12/docuprint-p12_user-manual_885407028.webp)
16 •
Chapter 2
2-1-2
Connecting power cord
If you have purchased any optional hardware, make sure you have
finished installing it before you come to this section.
1
Make sure the power switch is in the OFF [O] position.
2
Connect one end of the power cord to the socket at the rear of
the printer, then plug the other end of the power cord into a
grounded power outlet.
2-1-3
Setting up interface cable
☞
Appendix B Pin Configuration, &
1-4-4 Interface Cable
1
Switch off the power of both printer and computer.
2
Plug one end of the cable into the parallel connector on the
printer, and the other into the corresponding connector on your
computer.
3
Fasten the bail clips on the connector.
Summary of Contents for DocuPrint P12
