70
•
Chapter 5
Darkness
Determines the density at which you want the watermark to appear
on the printout. Move the slide left or right to adjust the density
level.
Scale
Specify the scale for the bitmap to be placed on the printout.
•
Actual Size
This option places the bitmap on the page at 100%.
•
Scale
Select this option to adjust the size of the bitmap to be placed
on the printout. Enter a scaling percentage in the
Percent
text
box to determine to what extent the specified bitmap is to be
enlarged or reduced. The valid percentage is
25%~400%
.
Preview area
This area shows you what the bitmap will look like on the printout.
Position frame
Specify the position of the graphic watermark. The options are
Automatically center watermark
and
Position relative to upper
left corner (in centimeters)
.
• When the
Regional Settings
for Windows is U.S. and Canada, the
measurement will be in inch. (The same as paper source’s default.)
• If you have clicked the
Edit
button, the preview will display both the
currently specified bitmap and any specified text. However, you can
only change the graphic watermark settings in the
Edit Graphic
Watermark
dialog and the text in the
Edit Text Watermark
dialog.
Summary of Contents for DocuPrint P12
